Inverter output reactorPRODUCT
CONTACT US
Tel：400-685-8582
Tel：+86-21-57715555
+86-21-37831986
Fax：+86-21-37831846
Phone：
Email：weho@chinaweho. com
Address：Building 2, No.8 Nanle Road, Songjiang District, Shanghai
Inverter output reactor
- Category：Inverter output reactor
- product description Output AC reactors are used on the load side of the inverter, and the motor current flows through these reactors. The output AC reactor compensates for the capacitive charge reversal current of long cables, and in the case of lon
- Hotline：
product description
Output AC reactors are used on the load side of the inverter, and the motor current flows through these reactors.
The output AC reactor compensates for the capacitive charge reversal current of long cables, and in the case of long motor cables, can limit the dv/dt of the motor terminals.
Performance characteristics
The iron core is made of high-quality oriented silicon steel sheet. The core column is divided into uniform small pieces through multiple air gaps. The air gap adopts high-temperature and high-strength adhesive glue to closely bond each small section of the core column with the upper and lower iron yokes. The use of high-quality anti-rust paint spraying process solves the problem of rust on the surface of the iron core of the reactor. Noise and vibration are greatly reduced during operation.
Weihao reactors all adopt the vacuum dipping process and are cured by high temperature heat baking. The coil has good insulation performance, high overall mechanical strength and good moisture resistance. The coil adopts F, H class insulation system, which greatly improves the reliability of long-term operation. Low temperature rise, low loss, low cost and high comprehensive utilization rate.product description
Reduce the noise of the motor and reduce the eddy current loss.
Reduce leakage current caused by input high harmonics.
Used for smoothing filtering, reducing transient voltage dv/dt and prolonging motor life.
Protect the power switching devices inside the inverter.
technical parameter
Rated working voltage: 400V/380V/50Hz or 660V/50Hz
Rated operating current: 5A to 1600A@40℃
Dielectric strength: iron core-winding 3500VAC/50Hz/10mA/10s without arcing breakdown
Insulation resistance: 1000VDC insulation resistance ≥ 100MV
Reactor noise: less than 65dB
Protection class: IP00
Insulation class: above class F
Product performance standards
IEC289:1987 Reactor
GB10229-88 Reactor (eqv IEC289:1987)
JB9644-1999 Reactor for Semiconductor Electric Transmission
Output AC reactor 0.5%-1%:
Output AC reactor 2%:
Installation size
|
Inverter power ( KW ) |
model |
Inductance ( mH ) |
Dimensions (mm) |
Installation size (mm) |
|
0.75 |
OCL-5 |
1.4 |
110*110*130 |
90*65 |
|
1.5 |
OCL-5 |
1.4 |
110*110*130 |
90*65 |
|
2.2 |
OCL-10 |
1.0 |
110*110*130 |
90*65 |
|
3.7 |
OCL-15 |
0.47 |
110*110*130 |
90*65 |
|
5.5 |
OCL-15 |
0.47 |
155*130*130 |
95*60 |
|
7.5 |
OCL-20 |
0.35 |
155*130*130 |
95*80 |
|
11 |
OCL-30 |
0.23 |
155*135*130 |
95*80 |
|
15 |
OCL-40 |
0.18 |
155*135*130 |
95*80 |
|
18 |
OCL-50 |
0.14 |
155*135*130 |
95*80 |
|
twenty two |
OCL-60 |
0.12 |
195*130*165 |
120*70 |
|
30 |
OCL-80 |
0.087 |
195*130*165 |
120*70 |
|
37 |
OCL-110 |
0.078 |
195*130*165 |
120*70 |
|
45 |
OCL-125 |
0.064 |
195*135*165 |
120*90 |
|
55 |
OCL-150 |
0.056 |
250*170*230 |
180*85 |
|
75 |
OCL-200 |
0.035 |
250*170*230 |
180*85 |
|
93 |
OCL-250 |
0.028 |
250*170*230 |
180*85 |
|
110 |
OCL-275 |
0.025 |
250*170*230 |
180*85 |
|
132 |
OCL-330 |
0.021 |
290*190*250 |
215*100 |
|
160 |
OCL-450 |
0.016 |
290*190*250 |
215*100 |
|
185 |
OCL-500 |
0.014 |
290*190*250 |
215*100 |
|
200 |
OCL-510 |
0.0137 |
320*220*320 |
245*110 |
|
220 |
OCL-540 |
0.013 |
320*220*320 |
245*110 |
|
250 |
OCL-625 |
0.011 |
320*240*320 |
245*130 |
|
280 |
OCL-700 |
0.010 |
320*240*320 |
245*130 |
|
315 |
OCL-800 |
0.0088 |
320*240*320 |
245*130 |
|
375 |
OCL-1000 |
0.007 |
385*250*395 |
260*175 |
|
400 |
OCL-1100 |
0.0064 |
385*250*395 |
260*175 |